Description
Variation of conditions 2(Approved Plans), 7(Visibility Splays) and 10(Brickwork) on application P18/S1477/FUL (Replacement dwelling) - changes to fenestration, new windows, alterations to chimney and changes to entrance gates and boundary wall.
Conditions / Refusal Reasons
That the development hereby approved shall be carried out in accordance with the details shown on the following approved plans, 0.1, 3450-401F, 3450-222, 3450-220 and 3450-201C, except as controlled or modified by conditions of this permission.
Reason: To secure the proper planning of the area in accordance with Development Plan policies.
The vision splays shown on drawing no. 3450/222, shall not be obstructed by any object, structure, planting or other material with a height exceeding or growing above 0.9 metres as measured from carriageway level.
Reason: In the interest of highway safety in accordance with Policy TRANS5 of the South Oxfordshire Local Plan 2035.
Notwithstanding the provisions of the Town and Country Planning (General Permitted Development) Order 2015 (or any Order revoking or re-enacting that Order), the enlargement, improvement or other alteration of any dwellinghouse as described in Schedule 2, Part 1, Class A of the Order shall not be undertaken without obtaining planning permission from the Local Planning Authority.
Reason: To safeguard the amenities of the occupiers of the adjoining properties and the character of the area in accordance with Policies DES1, DES2 and DES6 of the South Oxfordshire Local Plan 2035.
Any gates provided shall be set back a minimum of 5.0 metres from the edge of the carriageway and shall open inwards into the site.
Reason: To ensure that vehicles may wait clear of the highway while the gates are opened or closed in the interests of highway safety in accordance with Policy TRANS5 of the South Oxfordshire Local Plan 2035.